Start by cleaning your eyelids and ensuring that they are free of oil and makeup. This helps ensure that the magnetic lashes adhere properly.
-
Apply eyeliner:
- Apply the eyeliner as close to your natural lashes as possible.
- Draw a line that is as thick as the magnets on the lashes, and be sure to cover the entire eyelid so that the magnets on the lash band can hold.
- Wait 20-60 seconds, depending on the amount of eyeliner you have used. The eyeliner should be about 80% dry.
-
Prepare the lashes:
- Carefully remove the lashes from the tilt case.
- Bend the lash tape lightly to make it softer and to fit your eye shape.
-
Place the lashes:
- Place the middle of the magnetic eyelash on the center of your eyelid.
- First, make contact with the lashes at the outer corner of the eye, and then gently press the lashes into place at the inner corner.
- Make sure you get the lashes as close to your natural lashes as possible. You can squeeze the natural and magnetic lashes together to ensure a dense and natural fit.
Removal:
- Gently pull the lashes off your eyes.
- Clean your eyelids with an oil -based makeup remover.
Cleaning:
- If there is dried eyeliner on the magnets, then use the thumb nail to scrape as much as possible.
- Use a makeup napkin to gently clean off any leftovers on each of the magnets.